Panel Wipe Before Coating - Strips polishing oils, old wax, glaze and fingerprints from paintwork so ceramic coatings, sealants and waxes bond to bare clear coat rather than the residue on top. Also shows the true finish after machine polishing, so swirls and holograms filled by polish oils are not hidden on your paintwork. For detailers, valeters and enthusiasts. Mix to the Strength You Need - At 99.9% isopropyl alcohol it is supplied concentrated, so you control the ratio. Use it neat on glass and for decal prep, or dilute with distilled water for a gentler panel wipe on paintwork, typically 15-30% IPA in a spray bottle. One 1L bottle makes several litres of ready-to-use panel wipe. Decal, Wrap and PPF Prep - Removes wax, silicone dressings and road film before fitting vinyl wrap, paint protection film, decals, number plate pads, badges and trim tape, so adhesive edges hold and do not lift. Ideal for wrap installers and sign makers, and for clearing old sticker glue and tape residue after removing badges or graphics. Glass, Mirrors and Sensors - Gives a clear, streak-free finish on windscreens, side windows, mirrors and headlight lenses, cutting through the greasy film that causes glare at night. Use it on windscreens before glass coatings or rain repellent, on parking sensor and camera lenses, and to wipe down wiper blade edges to reduce smearing. Sizes and Safe Use - Choose 250ml for your detailing bag, 500ml for regular washes or 1L for workshops and valeting businesses. Use on a cool panel out of direct sunlight, test first on plastics, matte paint, fresh paint and interior trim, and avoid leather and rubber seals. Highly flammable: keep away from heat and flames and store sealed.