Liqui Moly Molygen Motor ProtectSynthetic high-pressure wear protection additive, designed for use in modern gasoline and diesel engines. A moldable and friction-reducing layer is built up in the engine that remains effective for at least 50,000 km. This leads in turn to an excellent reduction in wear, longer engine service life, reduction of fuel consumption and pollutants due to the low-friction effect and an optimal engine performance thanks to smooth running.For gasoline and diesel engines. Not suitable for use on motorbikes with wet clutches. Can be safely used in vehicles with toothed belt running in oil. 500 ml sufficient for up to 5 l motor oil.Properties- reduces fuel consumption- friction and wear reducing- stable under extreme pressures- increases smooth operation- tested for particulate filters and catalyticconverters- high thermal stability- miscible with all commercially available motor oils- long engine service lifeApplic­a­tionMolygen Motor Protect should be added approximately every 50,000 km during oil changes. Contents of the can sufficient for up to 5 liters of oil. Reduce the specified oil volume by 500 ml. For economic reasons, the addition should be made at or shortly after the oil change. Molygen Motor Protect is compatible with all commercially available mineral-based and synthetic-based motor oils.Note:Not suitable for use on motorbikes with wet clutches!.